.jpg)
.jpg)
.jpg)
SAND PROFILE AGENTT-101(TDS)
1. Description
These sand texture agents are polyamide modified fluoride copolymer which can produceexcellentwear resistant matt powder coating. Compared with the competitive products, T-101 canprovidegoodcost, low dosage, good dispersion and gloss stability. T-101 is designed for good cost formulation，added amount 0.3-0.8%.
2. Typical physical data
| Physical State | white powder |
| Specific Gravity or Density | 2.1 g/cm³ |
| Solid Content(%) | 99% |
| Particle size(D50) | 18-30um |
3. Suggested formulation
| Epoxy resin 260 | Epoxy resin 500 |
| Polyester resin 260 | B68 type matting agent 50 |
| Texturing agent T-101 4-5 | Texturing agent T-101 2 |
| Organic clay 15 | Flow agent T-988 10 |
| Flow agent T-988 5 | Matt BaSO4 200 |
| Pigments and Fillers 450 | Light calcium carbonate 250 |
4. Characteristics and application
● Providing excellent hardness, scratch/friction resistance and smoothness
● Silicon-free, not affect to re-coating. ? Use level range is 0.1-0.3%. To acquire more fine texture, lower gloss powder, add lower dosageofT-101. To acquire more coarse texture, add higher dosage of T-101.
● In combined with organic clay will provide better cost and performance.
● Coarse texture powder will relate to particle size and texture agent dosage.
● Don't add flow agent in the flat grained power coating. Combining silica is better. Whenproducesemi-matt one, please combine with excessive texturing agent, flow agent and small quantityof mattagent (0.5%) in the formulation. Add barium sulfate as the filler.
● Adding 0.2-0.8% very fine talcum powder can remove the problem of edge coverage.
5.Packaging and storage
Polyethylene lining, net weight 25KG caveat; stored in a cool and dry placetoavoidmoisture absorption.In the < 30 ℃ is valid for two years at room temperature
+86-13922504134
E-mail
